High-frequency pressure monitoring is an approach in pipe pressure monitoring related to increasing the frequency of pressure sampling in case of a pressure change.
ThingsLog LPMDL-110X data loggers can detect pressure changes and switch on into high-frequency pressure monitoring mode.
The High-frequency pressure monitoring mode is driven by two parameters – high-frequency sampling rate and high-frequency transmission mode.
If, for example, the reading interval is set at 1-minute, a 1-second spike in bandwidth utilization will be completely flattened and impossible to diagnose because 1-second represents only 1.7% of the total monitoring time. In a typical 5-minute reading cycle of most monitoring systems, those critical seconds will appear as little more than 0.33% of the total elapsed time — well below the radar of most systems. Nevertheless, this 1-second spike is of sufficient duration to perform damage, introduce leaks, brake pipes and lead to an increase of NRW – Non-revenue waters.
With ThingsLog such spikes are automatically detected and the pressure monitoring frequency is auto increased.
High-frequency pressure monitoring is automatically switched off once the logger detects that the pressure is back to the normal “average” value.
ThingsLog pressure monitoring solution supports low power mode and still catches and transmits the most interesting events to our smart monitoring platform. Designed with speed and scale in mind ThingsLog smart monitoring allows water professionals to capture transient pressure events with our adaptive high-frequency monitoring data loggers.
Dam monitoring is one of the most important engineering and monitoring topics of the current human society. Dams give live, drinking, and irrigation water, power for businesses and households. At the same time, they age, got cracks and overflow, and could cause great damage. Thus we need a way to monitor and log them and get analytical data to predict their aging and overflows and to get early warnings about those conditions.Read more
Hydrostatic level monitoring is a method to measure liquid levels in tanks, reservoirs, dams, or any other water by a submersible vented gauge level sensor. The readings from the sensor could be obtained by a data logger and transmitted to a central server where the monitored level could be analyzed and visualized. If there is an alarm condition level is getting low/high the level monitoring system generates events, alarms, and notifications.Read more
ThingsLog will benefit from Diamatix as a partner in Security managed services domain. Dimatix will enhance from security point of view ThingsLog product portfolio. At the same time ThingsLog IoT monitoring services will be offered as part of Diamatix Biomatix security solution.Read more
“What is consumption monitoring? Consumption monitoring is the ability to monitor the way you consume certain resources. In particular for the utility sector water, natural gas, electrical or heat energy.Read more
ThingsLog announces a new partnership with Callflow the leader in ip contact centers. The new partnership will allow ThingsLog customers to get alerts and intelligent AI driven alarms as a phone calls, SMSs, emails or on their favorite channel – Slack, hubspot, pager duty or others.Read more
Any energy meter has a pulse output option. The pulse output could be optical – a blinking diode (flashing led) used for calibrating the unit or electrical (so-called S0) pulse output.Read more
As many hotel owners know – the hotel water supply is precious. Without water hotel guests quickly run out of the hotel and claims are fired. Learn how ThingsLog can help you to avoid that situation and react quickly if it happens.Read more