Supported IoT Sensor Measurements and Devices
Bellow is a non-exhaustive list of many of the IoT sensors, meters and types of measurements supported by ThingsLog IoT data loggers, platform and solutions
Industrial IoT IoT Sensor Measurements and Automation
We would love to share our knowledge and help our customers to achieve any of the measurements and control listed bellow.
Supported IoT Water Meters
Supported IoT Water MetersSmart water meters are key part of our IoT platform and ThingsLog remote smart water metering solution. Some of the meters are supported through a direct LoRa/LoRaWAN integrations and some through interconnect with our own Low Power data loggers with 2/4G, NB-IoT, Cat-M1 or LoRa/LoRaWAN telemetry.
- Axioma W1 ultrasonic composite series with LoRa or NB-IoT network connectivity
- Axioma ultrasonic brass metering products E & F1 series with LoRa or Modbus interfaces
- Zenner LoRa/LoRaWAN meters and modules
- Wehrle water meters with Innotas LoRa/LoRaWAN click on modules
- Baylan LoRa/LoRaWAN meters
- Apator water meters with OrionM2M LoRa/LoRaWAN modules
- Itron water meters with pulse outputs
- Sensus water meters with pulse outputs
- Diehl water meters with pulse outputs
- Maddalena water meters with pulse outputs
- Any other water meter with pulse or mbus output
Supported Energy Meters
Supported energy meters are the foundation on which ThingsLog energy consumption monitoring solution is built. Most of the meters are supported either through modbus or by pulse counting.
- Any energy meter with modbus (ABB, Schneider, Noark, Orno, Fineco and many others).
- Any energy meter with pulse output
- Any gas flow meter with pulse output
- Axioma heating meters with LoRa/LoRaWAN connectivity
ON/OFF IoT Alarm Sensors
On/Off sensors are used across the solutions and in many industry specific use cases.
- Normally open door sensor
- Water leak sensors with on/off outputs
- Sensors for
- Various buttons (we have counted weird use cases – from openings of dispensers for toilet paper to toilet flushes)
Smart IoT Devices with Tasmota Open Firmware
Tasmota and the richness of so many ESP based devices came recently with ThingsLog 12/24 “Christmas” release. The release allowed any of those ubiquitous amount of smart devices to be simply “pluged in” any of the existing solution we have.
- Kincony ESP based controllers
- Waveshare ESP based controllers
- Refoss smart devices – smart plugs, energy meters, bulbs, thermostats
- Athom Tech smart devices – smart relays, energy meters, plugs etc.
- Any other device with Tasmota open source firmware.
Supported IoT Sensor Measurements
ThingsLog IoT platform and data loggers support many kind of analog and has built in drivers i2c sensors. Our data loggers has built in either 4 channels 16 bit ADC or 2 channel 24 bit sigma delta ADC for precise analog measurements. For most of the measurements bellow we can offer precise sensors, perform calibrations and ship together with our data loggers as a complete product delivery.
For example pressure monitoring is based on the pressure sensors, tanks and dam motioning on the level, air quality on the various gas sensors and agriculture on the sensors for meteo, leaf and soil measurements.
- Temperature measurements for air or soil temperature monitoring -70 C /+ 155 C
- Temperature platinum PT100/PT1000 sensors with 4-20mA convertors suitable for underwater temperature measurements
- Various thermocouple sensors
- Peltier elements
- Pressure – low-power current (4-20mA) or voltage (0-3V) differential pressure sensors suitable for smart water applications
- Level – low-power current (4-20mA) hydro-static level sensors suitable for tank or dam level monitoring
- Ultrasonic level sensors with modbus or 4-20mA output (non low power)
- Soil moisture sensors with voltage output 0-3V
- Load Cell, Inclinometer, accelerometer, vibration wire – through the (precise 24bit sigma-delta ADC) or modbus suitable for infrastructure monitoring of bridges, dams, lifts, critical infrastructure
- Gas sensor measurements – SO2, CO, CO2, NO, NO2, H2, H2S, HCHO, ETOH, O3
- Air quality sensors – particles matter PM1, PM2.5, PM4, PM10, IAQ, RESP
- Radiation – standard geiger muller counter
- Relative Humidity (RH%) – air humidity sensors ( 0.5)
- Leaf moisture
- Soil potential
- Water leak sensors
- Atmospheric pressure
- Force and/or weight measurements through 24 ADC
- Any other analog sensor suitable for 16 ADC measurements
- Wind speed & direction
- Rain gauges – both volume and intensity
- Various water quality measurements – PH, Salinity, Dissolved oxygen, turbidity, OPR, Conductivity
Relay Boards
On the relay boars are based ThingsLog solutions where direct control over electrical circuits is required for example street light control, VPP, pumping station automation.
- Any modbus relay board (there are 2,4, 6, 8 up to 16 port 16A relay boards)
- Soft starters (for example Siemens Sirius series) – controllable through modbus or relay circuits
Measurement of “X”
Finally if the meter or the measurement type, or the sensor you are looking for, is not in our list, please contact us. We would love to measure your “X” and offer a solution for it.
