High-frequency pressure monitoring is an approach in pipe pressure monitoring related to increasing the frequency of pressure sampling in case of a pressure change.
ThingsLog LPMDL-110X data loggers can detect pressure changes and switch on into high-frequency pressure monitoring mode.
The High-frequency pressure monitoring mode is driven by two parameters – high-frequency sampling rate and high-frequency transmission mode.
If, for example, the reading interval is set at 1-minute, a 1-second spike in bandwidth utilization will be completely flattened and impossible to diagnose because 1-second represents only 1.7% of the total monitoring time. In a typical 5-minute reading cycle of most monitoring systems, those critical seconds will appear as little more than 0.33% of the total elapsed time — well below the radar of most systems. Nevertheless, this 1-second spike is of sufficient duration to perform damage, introduce leaks, brake pipes and lead to an increase of NRW – Non-revenue waters.
With ThingsLog such spikes are automatically detected and the pressure monitoring frequency is auto increased.
High-frequency pressure monitoring is automatically switched off once the logger detects that the pressure is back to the normal “average” value.
ThingsLog pressure monitoring solution supports low power mode and still catches and transmits the most interesting events to our smart monitoring platform. Designed with speed and scale in mind ThingsLog smart monitoring allows water professionals to capture transient pressure events with our adaptive high-frequency monitoring data loggers.
Enlit Europe brought together over 10,000 visitors, 500 exhibitors, and 350 speakers, including leading experts, scientists and engineers from the energy sector. It has been a great experience to participate again in the show.Read more